Category:UniMate Quick Start Guides

From SecuTech Wiki
Revision as of 14:14, 30 August 2017 by Cynthia (talk | contribs)
Jump to navigationJump to search

Version 1.0

Version Date
1.0 2017.9

The data and information contained in this document cannot be altered without the express written permission of SecuTech Solution Inc. No part of this document can be reproduced or transmitted for any purpose whatsoever, either by electronic or mechanical means.

The general terms of trade of SecuTech Solution Inc. apply. Diverging agreements must be made in writing.

Copyright SecuTech Solution Inc. All rights reserved.

Contact Information

Web: http://www.esecutech.com

Email: sales@esecutech.com

Please Email any comments, suggestions or questions regarding this document or our products to us at: sales@esecutech.com

UniMate USB(mini)/Drive QS

UniMate driverless USB smart card authentication token
UniMate driverless USB smart card authentication token

UniMate USB(mini) Features

* CCID
* FIPS Certificated
* On-Demand Partition
* Smart Card
* PKCS#11 Supported
* MS-CAPI Supported
* X.509 Certificate Supported
* Globally Unique Hardware ID
* 3-Level Permission Management
* Secure Memory
* Highly Configurable


UniMate USB(mini) is a FIPS 140-2 algorithm certified smart card USB authentication token, and utilizes smart card technology for strong authentication. Smart Card technology allows for highly robust authentication and verification solutions.Available in mini formats.

UniMate driverless USB smart card authentication token

UniMate Drive Features

* Selective Mass Storage
* Two-Factor Authentication
* High-performance COS
* Multi-Level Permission Management
* Secure File System
* Normal Drive
* Virtual CD-ROM
* Highly Configurable

UniMate Drive is an authentication token with mass storage empowering software vendors with the flexibility to choose the level of protection and types of licensing as well as providing 2 different types of drive emulation: a normal partition(read and write) and a Virtual CD-ROM(read only) partition.

Remarks

• Please refer to the manuals within the documents directory of the SDK for in-depth information regarding UniMate Utilities, procedures and associated information. Additional resources can be obtained from our Wiki page (www.eSecuTech.com/wiki).

• Please read the Readme file located in the root directory of the SDK (SDK/Readme.txt) for information on usage and further development.

• Please read the tool-specific Readme file located in each tool-specific directory before use.

• Console and Monitor tools in the SDK is needed for use. The Partition tool (only for UniMate Drive) is designed to run without the need to be installed on your OS.

• For technical assistance, email (Support@eSecuTech.com) or by opening a ticket at (www.eSecuTech.com/support).

• UniMate requires the installation of the PKI package to operate on a computer.


SDK Contents

After obtaining a copy of the UniMate SDK, please read the Readme file located in the root directory of the UniMate SDK. The following is an outline of the folders contents in the UniMate SDK:

CSP(MS-CAP): Declaration of the standardized identifiers and interface of CSP; CSP libraries; Redists/PKI package.exe; Samples for CSP; CSP Manual.pdf.

Documents: UniMate manual.

PKCS#11: Declaration of the standardized identifiers and interface of PKCS; PKCS libraries; Samples for PKCS; PKCS#11.pdf

Utilities: Utilities Installation (Console setup.exe, Monitor setup.exe, Partition.exe(only for UniMate Drive)) and Utilities Manual.

Value Added API: Declaration of the standardized identifiers and interface of Value Added API; Value Added API libraries; Samples for Value Added API; API Manual.pdf

Quick Start.pdf

ReadMe.txt

Preparation

For computer:

•Install the PKI package onto your computer.

•Connect the UniMate to the computer with the Micro to USB Type A cable provided. The UniMate device is ready when the LED light is on and the UniMate Monitor tool detects the UniMate.

•To access the UniMate, input the PIN code, the default Admin PIN is “00000000”, the default User PIN is “11111111”, without quotation marks.

For the mobile device:

•Download and install the UniMate app.

•Connect a charged UniMate to the mobile device via the audio port and access it within the UniMate app.

Secure Mobile Payment Solution

Mobile devices equipped with UniMate two-factor authentication can safeguard sensitive data from malicious attacks. User verification, cryptographic, offline authorization can be performed by UniMate technology and customers can buy anything at any time and place. All critical security data is stored on the UniMate, instead of on the mobile device and cannot be accessed, significantly thwarting attempts to siphon data .

PKI technology requires a digital certificate and the correct password for the corresponding digital certificate to be entered by the user to complete a transaction. Storing these digital certificates on a UniMate as a second-factor token separate from the mobile device effectively reduces the potential risk of security breaches from malware and man-in-the-middle attacks, as digital certificates stored on the token cannot be exported or otherwise accessed without the appropriate credentials.

This category currently contains no pages or media.