UniMate USB Utilities Manual: Difference between revisions

From SecuTech Wiki
Jump to navigationJump to search
← Older editNewer edit →

Bao (talk | contribs)

0 edits
Bao (talk | contribs)
0 edits
m Added category tag
Bao (talk | contribs)
0 edits
m Added alt tags
Line 79: Line 79:
Run <code>Console setup.exe</code> and click Next.
Run <code>Console setup.exe</code> and click Next.


[[File:UniMate Console Setup.PNG]]
[[File:UniMate Console Setup.PNG|alt=UniMate Console setup window]]




Choose where to install the program to, and click Install.
Choose where to install the program to, and click Install.


[[File:UniMate Console Path.PNG]]
[[File:UniMate Console Path.PNG|alt=UniMate Console path install location]]




At last, click Finish to close the setup wizard.
At last, click Finish to close the setup wizard.


[[File:UniMate Console Installed.PNG]]
[[File:UniMate Console Installed.PNG|alt=installed UniMate Console]]
 


===Initialize a UniMate===
===Initialize a UniMate===
This operation will clean up all the certificates and keys on the PKI file system. Please proceed with caution. Click PKI Format on the menu bar. Input a device name when a new name is required and click Format.
This operation will clean up all the certificates and keys on the PKI file system. Please proceed with caution. Click PKI Format on the menu bar. Input a device name when a new name is required and click Format.


[[File:PKI Format.jpeg|500px]]
[[File:PKI Format.jpeg|500px|alt=UniMate Console PKI format]]
 


Please verify administrator rights for this operation, and if correct a prompt indicating completion should pop-up.
Please verify administrator rights for this operation, and if correct a prompt indicating completion should pop-up.


[[File:PKI Format Complete.png|350px]]
[[File:PKI Format Complete.png|350px|alt=completed PKI format]]


===Manage PINs===
===Manage PINs===
PINs should be between 8 and 24 characters long, if a user PIN is locked, you can reset it using an administrator account.  
PINs should be between 8 and 24 characters long, if a user PIN is locked, you can reset it using an administrator account. Click PIN Management on the menu bar. To change a PIN; enter the old PIN, create a new PIN and then re-enter it to confirm, and finally click Apply.
 
Click PIN Management on the menu bar.


 
[[File:PIN Management Admin.png|500px|alt=UniMate Console change PIN]]
To change a PIN; enter the old PIN, create a new PIN and then re-enter it to confirm, and finally click Apply.
 
[[File:PIN Management Admin.png|500px]]




To reset a user PIN; enter the admin PIN, enter the new user PIN and then re-type the user PIN to confirm, followed by clicking Apply.
To reset a user PIN; enter the admin PIN, enter the new user PIN and then re-type the user PIN to confirm, followed by clicking Apply.


[[File:PIN Management User.png|500px]]
[[File:PIN Management User.png|500px|alt=UniMate Console reset PIN]]
 


===Manage certificates===
===Manage certificates===
Certificates Container displays the existing certificates. Each UniMate can carry a maximum of 8 certificates or asymmetric key pairs.
Certificates Container displays the existing certificates. Each UniMate can carry a maximum of 8 certificates or asymmetric key pairs.


====Importing certificates====
====Importing certificates====
Click Certificate Management on the menu bar, then click on the "+" button.
Click Certificate Management on the menu bar, then click on the "+" button.


[[File:Importing Certificates.png|500px]]
[[File:Importing Certificates.png|500px|alt=UniMate Console certificate management]]
 


If you do not have the correct permissions; log in using a user PIN, then select a certificate file (.pfx or .p12 formats), input the password, and click Import.
If you do not have the correct permissions; log in using a user PIN, then select a certificate file (.pfx or .p12 formats), input the password, and click Import.


[[File:Import Cert Path.png|400px]]
[[File:Import Cert Path.png|400px|alt=UniMate Console import certificate path]]
 


Now that certificate has been imported, hover the mouse over it, and the certificates details will be listed as below.
Now that certificate has been imported, hover the mouse over it, and the certificates details will be listed as below.


[[File:Display Cert Details.png|500px]]
[[File:Display Cert Details.png|500px|alt=display certificate details]]


====View certificates====
====View certificates====
To view a certificate, click on a certificate to select it, followed by View to see the certificates details.
To view a certificate, click on a certificate to select it, followed by View to see the certificates details.


[[File:View Cert.png|500px]]
[[File:View Cert.png|500px|alt=viewing a certificate]]
 


[[File:Cert Viewer.jpeg|350px]]
[[File:Cert Viewer.jpeg|350px|alt=certificate viewer]]


====Export certificates====
====Export certificates====
To export a certificate, click on a certificate to select it, followed by pressing Export.
To export a certificate, click on a certificate to select it, followed by pressing Export.


[[File:View Cert.png|500px]]
[[File:View Cert.png|500px|alt=viewing a certificate]]
 


Select the file path you want to save the certificate to and click Export.
Select the file path you want to save the certificate to and click Export.


[[File:Export Cert Path.png|400px]]
[[File:Export Cert Path.png|400px|alt=UniMate Console export certificate path]]
 


A success prompt will pop up if the certificate exported correctly.
A success prompt will pop up if the certificate exported correctly.


[[File:Export Cert Success.png|350px]]
[[File:Export Cert Success.png|350px|alt=certificate exported successfully]]


====Signing with certificates====
====Signing with certificates====
To sign with a private key or verify the public key of a certificate. Click on a certificate to select it, and then click Sign.
To sign with a private key or verify the public key of a certificate. Click on a certificate to select it, and then click Sign.


[[FIle:View Cert.png|500px]]
[[FIle:View Cert.png|500px|viewing a certificate]]
 


To sign with a private key. Choose Sign for the Action and select the mode (hashing function). Input the data to be signed in hexadecimal format. For example, you could enter 0d0a, which consists of four hexadecimal digits (two bytes) and represents 0x0d0a. At last, click Sign; the signed data will be displayed on the right side.
To sign with a private key. Choose Sign for the Action and select the mode (hashing function). Input the data to be signed in hexadecimal format. For example, you could enter 0d0a, which consists of four hexadecimal digits (two bytes) and represents 0x0d0a. At last, click Sign; the signed data will be displayed on the right side.


[[File:Cert Op Sign.jpeg|500px]]
[[File:Cert Op Sign.jpeg|500px|alt=signing a certificate]]
 


To verify with a public key, choose Verify for the action and select the mode. Input the data to be signed as well as the signed data and then click Verify.
To verify with a public key, choose Verify for the action and select the mode. Input the data to be signed as well as the signed data and then click Verify.


[[File:Cert Op Verify.jpeg|500px]]
[[File:Cert Op Verify.jpeg|500px|alt=verifying a certificate]]
 


A success prompt will appear if the signed and unsigned data match.
A success prompt will appear if the signed and unsigned data match.


[[File:Cert Op Verify Success.jpeg|350px]]
[[File:Cert Op Verify Success.jpeg|350px|alt=certificate verified successfully]]


====Deleting certificates====
====Deleting certificates====
Click to select a certificate, and then click Delete.
Click to select a certificate, and then click Delete.


[[File:Delete Cert.png|400px]]
[[File:Delete Cert.png|400px|alt=delete a certificate]]


Select Yes to delete the selected certificate.
Select Yes to delete the selected certificate.


===Manage keys or key pairs===
===Manage keys or key pairs===
Existing keys and key pairs are shown in the symmetric keys and asymmetric key pairs container respectively. Each UniMate can carry a maximum of 12 symmetric keys and a maximum of 4 certificates or asymmetric key pairs.
Existing keys and key pairs are shown in the symmetric keys and asymmetric key pairs container respectively. Each UniMate can carry a maximum of 12 symmetric keys and a maximum of 4 certificates or asymmetric key pairs.


====Key generation====
====Key generation====
Click Key Management on the menu bar; if you dont have the required permissions, log in with a user PIN. Next, click on the + button for the type of key you want to generate.
Click Key Management on the menu bar; if you dont have the required permissions, log in with a user PIN. Next, click on the + button for the type of key you want to generate.


[[File:Key Management.png|500px]]
[[File:Key Management.png|500px|alt=UniMate Console key management]]
 


Select Auto if you want to automatically generate a key. By clicking Manual, you will have to input the keys manually. On placing the mouse over the field Input it will display greater detail on what needs to be entered. Next, please input a key ID as a unique identification number respective to the key, and at last, click OK.
Select Auto if you want to automatically generate a key. By clicking Manual, you will have to input the keys manually. On placing the mouse over the field Input it will display greater detail on what needs to be entered. Next, please input a key ID as a unique identification number respective to the key, and at last, click OK.


[[File:Generate Key.png|400px]]
[[File:Generate Key.png|400px|alt=generate symmetric key]]
 


Now that a symmetric key has been generated, move the mouse to it, the key ID will be displayed as shown below.
Now that a symmetric key has been generated, move the mouse to it, the key ID will be displayed as shown below.


[[File:Display Symmetric Key ID.png|500px]]
[[File:Display Symmetric Key ID.png|500px|alt=display symmetric key ID]]


====Encrypt or decrypt with a symmetric key====
====Encrypt or decrypt with a symmetric key====
Click to select a symmetric key and click Encrypt.
Click to select a symmetric key and click Encrypt.


[[File:Encrypt Symmetric Key.png|500px]]
[[File:Encrypt Symmetric Key.png|500px|alt=encrypt using a symmetric key]]
 


Select the action and mode to be performed (please input an initialization vector (iv) when CBC or CBC_PAD is chosen). Next, input the data to be operated on and click Encrypt or Decrypt, the output data will be displayed on the right side.
Select the action and mode to be performed (please input an initialization vector 'iv' when CBC or CBC_PAD is chosen). Next, input the data to be operated on and click Encrypt or Decrypt, the output data will be displayed on the right side.


[[File:Symmetric Key Operation.png|500px]]
[[File:Symmetric Key Operation.png|500px|alt=select action and mode for the encryption/decryption to be performed]]


====Delete a symmetric key====
====Delete a symmetric key====
Select the symmetric key in the Key Management tab and then click Delete.
Select the symmetric key in the Key Management tab and then click Delete.


[[File:Delete Symmetric Key.png|350px]]
[[File:Delete Symmetric Key.png|350px|delete symmetric key]]


Click Yes to delete the selected key.
Click Yes to delete the selected key.


===Manage asymmetric key pairs===
===Manage asymmetric key pairs===
Line 228: Line 209:
Click Key Management on the menu bar; if you do not have the correct permissions, log in with a user PIN. Next, click on the + button in the Asymmetric Key Pairs Container window.
Click Key Management on the menu bar; if you do not have the correct permissions, log in with a user PIN. Next, click on the + button in the Asymmetric Key Pairs Container window.


[[File:Key Management.png|500px]]
[[File:Key Management.png|500px|alt=UniMate Console key management]]
 


Select a key pair type and input a key pair ID as a unique identification number, and then click Generate.
Select a key pair type and input a key pair ID as a unique identification number, and then click Generate.


[[File:Generate Key Pair.png|400px]]
[[File:Generate Key Pair.png|400px|alt=generate asymmetric key pair]]


====Encrypt, decrypt, sign or verify with an asymmetric key pair====
====Encrypt, decrypt, sign or verify with an asymmetric key pair====
Select an already created asymmetric key pair and click Encrypt.
Select an already created asymmetric key pair and click Encrypt.


[[File:Asymmetric Key Pairs Container.png|500px]]
[[File:Asymmetric Key Pairs Container.png|500px|alt=asymmetric key pairs list]]
 


Select the action to be performed. If you click Private-Key Sign or Public-Key Verify, you have to choose a mode. Next, input the data to be operated on. Click Encrypt/Decrypt/Sign, and the output data will display on the right side. If you selected Public-Key Verify, you should input the data to be signed as well as the signed data. Click Verify, and a success prompt will appear if the data is verified correctly.
Select the action to be performed. If you click Private-Key Sign or Public-Key Verify, you have to choose a mode. Next, input the data to be operated on. Click Encrypt/Decrypt/Sign, and the output data will display on the right side. If you selected Public-Key Verify, you should input the data to be signed as well as the signed data. Click Verify, and a success prompt will appear if the data is verified correctly.


[[File:Key Pair Op.png|500px]]
[[File:Key Pair Op.png|500px|alt=asymmetric key pair operations]]


====Delete an asymmetric key pair====
====Delete an asymmetric key pair====
To delete an asymmetric key pair, select the key pair to be deleted and click the Delete option in the main window.
To delete an asymmetric key pair, select the key pair to be deleted and click the Delete option in the main window.


[[File:Delete Key Pair.png|400px]]
[[File:Delete Key Pair.png|400px|alt=delete asymmetric key pair]]


Click Yes to delete the selected key pair.
Click Yes to delete the selected key pair.


[[#Table of Contents|CONTENTS]]


<div style="page-break-before:always"></div>
<div style="page-break-before:always"></div>
==Monitor tool==
==Monitor tool==
UniMate Monitor is used to view detailed information about certificates imported into the UniMate, and register or delete certificates. It also provides a way to check information about the UniMate itself and to change User PINs.
UniMate Monitor is used to view detailed information about certificates imported into the UniMate, and register or delete certificates. It also provides a way to check information about the UniMate itself and to change User PINs.
Line 263: Line 239:
Run <code>Monitor setup.exe</code> and follow the onscreen instructions.
Run <code>Monitor setup.exe</code> and follow the onscreen instructions.


[[File:UniMate Monitor Setup.PNG]]
[[File:UniMate Monitor Setup.PNG|alt=UniMate Monitor setup window]]
 


Choose an install location, and click Install.
Choose an install location, and click Install.


[[File:UniMate Monitor Path.PNG]]
[[File:UniMate Monitor Path.PNG|alt=UniMate Monitor installation path]]
 


Click Finish to close the setup wizard.
Click Finish to close the setup wizard.


[[File:UniMate Monitor Installed.PNG]]
[[File:UniMate Monitor Installed.PNG|alt=UniMate Monitor installed]]
 


===UniMate detection===
===UniMate detection===
Line 285: Line 258:
  </tr>
  </tr>
  <tr>
  <tr>
   <td>[[File:Insert Token.png]]</td>
   <td>[[File:Insert Token.png|alt=UniMate token hash been inserted]]</td>
   <td>[[File:Remove Token.png]]</td>
   <td>[[File:Remove Token.png|alt=UniMate token has been removed]]</td>
  </tr>
  </tr>
</table>
</table>
Line 293: Line 266:
Insert a UniMate and select a target device, then click Change PIN.
Insert a UniMate and select a target device, then click Change PIN.


[[File:Change UniMate PIN.png]]
[[File:Change UniMate PIN.png|alt=change a UniMate PIN]]
 


To change a PIN; enter the old PIN, create a new PIN and then re-enter the new PIN and click OK to confirm.
To change a PIN; enter the old PIN, create a new PIN and then re-enter the new PIN and click OK to confirm.


[[File:Change UniMate Password.png|400px]]
[[File:Change UniMate Password.png|400px|alt=change UniMate password dialogue]]
 


Assuming everything was correct, a success prompt will appear.
Assuming everything was correct, a success prompt will appear.


[[File:Change UniMate PIN Success.png|350px]]
[[File:Change UniMate PIN Success.png|350px|alt=UniMate PIN successfully changed]]


===Import certificates===
===Import certificates===
Click Import.
Click Import.


[[File:Import UniMate Cert.png|500px]]
[[File:Import UniMate Cert.png|500px|alt=importing a certificate into UniMate]]
 


If you do not have the required permissions, you will need to log in using a user PIN.
If you do not have the required permissions, you will need to log in using a user PIN.


[[File:UniMate User Login.png|400px]]
[[File:UniMate User Login.png|400px|alt=log in as a user]]
 


Select a certificate file (.pfx or .p12 formats).
Select a certificate file (.pfx or .p12 formats).


[[File:Import PFX.jpeg|400px]]
[[File:Import PFX.jpeg|400px|alt=import .pfx or .p12 certificate file]]
 


Input the password of the certificate.
Input the password of the certificate.


[[File:UniMate Private Key Password.png|400px]]
[[File:UniMate Private Key Password.png|400px|alt=input private key of the certificate to be imported]]
 


A success prompt will appear if certificate imports correctly.
A success prompt will appear if certificate imports correctly.


[[File:Import UniMate Cert Success.png|350px]]
[[File:Import UniMate Cert Success.png|350px|alt=certificate imported successfully]]
 


The certificate should now be displayed in the list.
The certificate should now be displayed in the list.


[[File:List Display UniMate Cert.png]]
[[File:List Display UniMate Cert.png|alt=imported certificate displayed in list]]


===Register or unregister certificates===
===Register or unregister certificates===
In <code>Internet Explorer -- Tools -- Internet Options -- Content -- Certificates</code> check the registered certificates.
In <code>Internet Explorer -- Tools -- Internet Options -- Content -- Certificates</code> check the registered certificates.


[[File:IE - Cert.jpeg|400px]]
[[File:IE - Cert.jpeg|400px|Alt=Internet Explorer Internet options certificates]]
 


As an example, there is no certificate listed yet.
As an example, there is no certificate listed yet.


[[File:No IE - Cert.jpeg|500px]]
[[File:No IE - Cert.jpeg|500px|alt=no certificate listed in Internet Explorer]]
 


To register a certificate, select the certificate and then click Register.
To register a certificate, select the certificate and then click Register.


[[File:Register UniMate Cert.png|500px]]
[[File:Register UniMate Cert.png|500px|alt=registering a certificate]]
 


A prompt should appear to tell you that the certificate has been registered.
A prompt should appear to tell you that the certificate has been registered.


[[File:Register UniMate Cert Success.png|350px]]
[[File:Register UniMate Cert Success.png|350px|alt=certificate has been registered successfully]]
 


Go back to <code>Internet Explorer -- Tools -- Internet Options -- Content -- Certificates</code>; the registered certificate should now be displayed on the list.
Go back to <code>Internet Explorer -- Tools -- Internet Options -- Content -- Certificates</code>; the registered certificate should now be displayed on the list.


[[File:New UniMate Cert Displayed.jpeg|500px]]
[[File:New UniMate Cert Displayed.jpeg|500px|alt=registered certificate now displaying in Internet Explorer]]
 


To unregister a certificate, select a certificate and click Un-Register.
To unregister a certificate, select a certificate and click Un-Register.


[[File:Unregister UniMate Cert.png]]
[[File:Unregister UniMate Cert.png|alt=deregistering a UniMate certificate]]
 


After confirming, the certificate will be deregistered.
After confirming, the certificate will be deregistered.


[[File:Unregister UniMate Cert Success.png|350px]]
[[File:Unregister UniMate Cert Success.png|350px|alt=certificate deregistered successfully]]
 


Back in <code>Internet Explorer -- Tools -- Internet Options -- Content -- Certificates</code>, the registered certificate will have been removed.
Back in <code>Internet Explorer -- Tools -- Internet Options -- Content -- Certificates</code>, the registered certificate will have been removed.


[[File:No IE - Cert.jpeg|500px]]
[[File:No IE - Cert.jpeg|500px|alt=no certificate displayed in Internet Explorer]]


===View certificates===
===View certificates===
Select a certificate.
Select a certificate.


[[File:Unregister UniMate Cert.png]]
[[File:Unregister UniMate Cert.png|alt=selecting a certificate to view]]
 


Click View to see the certificates details.
Click View to see the certificates details.


[[File:Cert Viewer.jpeg|400px]]
[[File:Cert Viewer.jpeg|400px|alt=certificate viewer]]


===Expiration reminder===
===Expiration reminder===
You can set an expiration reminder time.
You can set an expiration reminder time.


[[File:List Display UniMate Cert.png|500px]]
[[File:List Display UniMate Cert.png|500px|alt=setting an expiration date reminder]]
 


Click Set.
Click Set.


[[File:Set Expiry Reminder Success.png|350px]]
[[File:Set Expiry Reminder Success.png|350px|alt=expiration date reminder successfully set]]
 


When the expiration date is close to arriving, a balloon notification will appear to provide a warning that the certificate is close to expiring.
When the expiration date is close to arriving, a balloon notification will appear to provide a warning that the certificate is close to expiring.


[[File:Expiry Due Notification.png|200px]]
[[File:Expiry Due Notification.png|200px|alt=user's certificate will expire soon]]


[[#Table of Contents|CONTENTS]]


<div style="page-break-before:always"></div>
<div style="page-break-before:always"></div>
==Partition Tool (only for UniMate drive)==
==Partition Tool (only for UniMate drive)==
UniMate Drive Partition tool allows developer to set partitions, and to upload an ISO image to the Drives CD-ROM.
UniMate Drive Partition tool allows developer to set partitions, and to upload an ISO image to the Drives CD-ROM.


[[File:UniMate Drive Partition Tool.png|500px]]
[[File:UniMate Drive Partition Tool.png|500px|alt=UniMate Drive partition tool]]


Click Get, and you will be provided with the total usable size of the UniMate Drive. You can set the partition as you wish, and then click Partition to perform the resize operation.
Click Get, and you will be provided with the total usable size of the UniMate Drive. You can set the partition as you wish, and then click Partition to perform the resize operation.


[[File:UniMate Drive Partition Tool Load.png|500px|alt=UniMate Drive partition tool, load ISO image]]


[[File:UniMate Drive Partition Tool Load.png|500px]]
In the Load Image tab, you can load an ISO image to the Drives CD-ROM partition.


In the Load Image tab, you can load an ISO image to the Drives CD-ROM partition.


<div style="page-break-before:always"></div>
<div style="page-break-before:always"></div>
==Write ISO Tool==
==Write ISO Tool==
UniMate Write ISO Tool is used for writing ISO images to UniKey dongles.
UniMate Write ISO Tool is used for writing ISO images to UniKey dongles.


[[File:UniMate Write ISO Tool.png|500px]]
[[File:UniMate Write ISO Tool.png|500px|alt=UniMate write ISO image to dongle tool]]


<br>


==Change Language Mode Tool (For UniMate Flex)==
==Change Language Mode Tool (For UniMate Flex)==
UniMate Change Language Mode Tool is used with the UniMate Flex to change the display language.
UniMate Change Language Mode Tool is used with the UniMate Flex to change the display language.


[[File:Change Language Mode Tool.png]]
[[File:Change Language Mode Tool.png|alt=UniMate change language mode]]


<div style="page-break-before:always"></div>
<div style="page-break-before:always"></div>

Revision as of 16:27, 27 July 2016


Utilities Manual

Version 2.0

Version Date
1.0 2015.7
2.0 2016.7

The data and information contained in this document cannot be altered without the express written permission of SecuTech Solution Inc. No part of this document can be reproduced or transmitted for any purpose whatsoever, either by electronic or mechanical means.

The general terms of trade of SecuTech Solution Inc. apply. Diverging agreements must be made in writing.

Copyright SecuTech Solution Inc. All rights reserved.

WINDOWS is a registered trademark of Microsoft Corporation.

The WINDOWS-logo is a registered trademark (TM) of Microsoft Corporation.

Software License

The software and the enclosed documentation are copyright-protected. By installing the software, you agree to the conditions of the licensing agreement.

Licensing Agreement

SecuTech Solution Inc. (SecuTech for short) gives the buyer the simple, exclusive and non-transferable licensing right to use the software on one individual computer or networked computer system (LAN). Copying and any other form of reproduction of the software in full or in part as well as mixing and linking it with others is prohibited. The buyer is authorized to make one single copy of the software as backup. SecuTech reserves the right to change or improve the software without notice or to replace it with a new development. SecuTech is not obliged to inform the buyer of changes, improvements or new developments or to make these available to him. A legally binding promise of certain qualities is not given. SecuTech is not responsible for damage unless it is the result of deliberate action or negligence on the part of SecuTech or its aids and assistants. SecuTech accepts no responsibility of any kind for indirect, accompanying or subsequent damage.

Contact Information

Web: http://www.esecutech.com

Email: sales@esecutech.com

Please Email any comments, suggestions or questions regarding this document or our products to us at: sales@esecutech.com


CE Attestation of Conformity
UniMate is in conformity with the protection requirements of CE Directives 89/336/EEC Amending Directive 92/31/EEC. UniMate satisfies the limits and verifying methods: EN55022/CISPR 22 Class B, EN55024: 1998.




FCC Standard
This device is in conformance with Part 15 of the FCC Rules and Regulation for Information Technology Equipment.
Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.




The equipment of UniMate is USBbased.




Conformity to ISO 9001:2000
The Quality System of SecuTech Solution Inc., including its implementation, meets the requirements of the standard ISO 9001:2000




ROHS
All UniMate products are environmentally friendly with ROHS certificates.





Console

UniMate Console is used to manage devices, initialize a UniMate as well as manage certificates and keys.

Installation

Console setup.exe can be found in the Utilities folder of the UniMate SDK.


Run Console setup.exe and click Next.

UniMate Console setup window


Choose where to install the program to, and click Install.

UniMate Console path install location


At last, click Finish to close the setup wizard.

installed UniMate Console

Initialize a UniMate

This operation will clean up all the certificates and keys on the PKI file system. Please proceed with caution. Click PKI Format on the menu bar. Input a device name when a new name is required and click Format.

UniMate Console PKI format

Please verify administrator rights for this operation, and if correct a prompt indicating completion should pop-up.

completed PKI format

Manage PINs

PINs should be between 8 and 24 characters long, if a user PIN is locked, you can reset it using an administrator account. Click PIN Management on the menu bar. To change a PIN; enter the old PIN, create a new PIN and then re-enter it to confirm, and finally click Apply.

UniMate Console change PIN


To reset a user PIN; enter the admin PIN, enter the new user PIN and then re-type the user PIN to confirm, followed by clicking Apply.

UniMate Console reset PIN

Manage certificates

Certificates Container displays the existing certificates. Each UniMate can carry a maximum of 8 certificates or asymmetric key pairs.

Importing certificates

Click Certificate Management on the menu bar, then click on the "+" button.

UniMate Console certificate management

If you do not have the correct permissions; log in using a user PIN, then select a certificate file (.pfx or .p12 formats), input the password, and click Import.

UniMate Console import certificate path

Now that certificate has been imported, hover the mouse over it, and the certificates details will be listed as below.

display certificate details

View certificates

To view a certificate, click on a certificate to select it, followed by View to see the certificates details.

viewing a certificate

certificate viewer

Export certificates

To export a certificate, click on a certificate to select it, followed by pressing Export.

viewing a certificate

Select the file path you want to save the certificate to and click Export.

UniMate Console export certificate path

A success prompt will pop up if the certificate exported correctly.

certificate exported successfully

Signing with certificates

To sign with a private key or verify the public key of a certificate. Click on a certificate to select it, and then click Sign.

viewing a certificate

To sign with a private key. Choose Sign for the Action and select the mode (hashing function). Input the data to be signed in hexadecimal format. For example, you could enter 0d0a, which consists of four hexadecimal digits (two bytes) and represents 0x0d0a. At last, click Sign; the signed data will be displayed on the right side.

signing a certificate

To verify with a public key, choose Verify for the action and select the mode. Input the data to be signed as well as the signed data and then click Verify.

verifying a certificate

A success prompt will appear if the signed and unsigned data match.

certificate verified successfully

Deleting certificates

Click to select a certificate, and then click Delete.

delete a certificate

Select Yes to delete the selected certificate.


Manage keys or key pairs

Existing keys and key pairs are shown in the symmetric keys and asymmetric key pairs container respectively. Each UniMate can carry a maximum of 12 symmetric keys and a maximum of 4 certificates or asymmetric key pairs.

Key generation

Click Key Management on the menu bar; if you dont have the required permissions, log in with a user PIN. Next, click on the + button for the type of key you want to generate.

UniMate Console key management

Select Auto if you want to automatically generate a key. By clicking Manual, you will have to input the keys manually. On placing the mouse over the field Input it will display greater detail on what needs to be entered. Next, please input a key ID as a unique identification number respective to the key, and at last, click OK.

generate symmetric key

Now that a symmetric key has been generated, move the mouse to it, the key ID will be displayed as shown below.

display symmetric key ID

Encrypt or decrypt with a symmetric key

Click to select a symmetric key and click Encrypt.

encrypt using a symmetric key

Select the action and mode to be performed (please input an initialization vector 'iv' when CBC or CBC_PAD is chosen). Next, input the data to be operated on and click Encrypt or Decrypt, the output data will be displayed on the right side.

select action and mode for the encryption/decryption to be performed

Delete a symmetric key

Select the symmetric key in the Key Management tab and then click Delete.

delete symmetric key

Click Yes to delete the selected key.


Manage asymmetric key pairs

Generate a key pair

Click Key Management on the menu bar; if you do not have the correct permissions, log in with a user PIN. Next, click on the + button in the Asymmetric Key Pairs Container window.

UniMate Console key management

Select a key pair type and input a key pair ID as a unique identification number, and then click Generate.

generate asymmetric key pair

Encrypt, decrypt, sign or verify with an asymmetric key pair

Select an already created asymmetric key pair and click Encrypt.

asymmetric key pairs list

Select the action to be performed. If you click Private-Key Sign or Public-Key Verify, you have to choose a mode. Next, input the data to be operated on. Click Encrypt/Decrypt/Sign, and the output data will display on the right side. If you selected Public-Key Verify, you should input the data to be signed as well as the signed data. Click Verify, and a success prompt will appear if the data is verified correctly.

asymmetric key pair operations

Delete an asymmetric key pair

To delete an asymmetric key pair, select the key pair to be deleted and click the Delete option in the main window.

delete asymmetric key pair

Click Yes to delete the selected key pair.


Monitor tool

UniMate Monitor is used to view detailed information about certificates imported into the UniMate, and register or delete certificates. It also provides a way to check information about the UniMate itself and to change User PINs.

Installation

Run Monitor setup.exe and follow the onscreen instructions.

UniMate Monitor setup window

Choose an install location, and click Install.

UniMate Monitor installation path

Click Finish to close the setup wizard.

UniMate Monitor installed

UniMate detection

Once the Monitor tool is installed, a new icon appears in the system tray, it will inform you when a UniMate is detected like so:

Insert a UniMate Remove a UniMate
UniMate token hash been inserted UniMate token has been removed

Change PINs

Insert a UniMate and select a target device, then click Change PIN.

change a UniMate PIN

To change a PIN; enter the old PIN, create a new PIN and then re-enter the new PIN and click OK to confirm.

change UniMate password dialogue

Assuming everything was correct, a success prompt will appear.

UniMate PIN successfully changed

Import certificates

Click Import.

importing a certificate into UniMate

If you do not have the required permissions, you will need to log in using a user PIN.

log in as a user

Select a certificate file (.pfx or .p12 formats).

import .pfx or .p12 certificate file

Input the password of the certificate.

input private key of the certificate to be imported

A success prompt will appear if certificate imports correctly.

certificate imported successfully

The certificate should now be displayed in the list.

imported certificate displayed in list

Register or unregister certificates

In Internet Explorer -- Tools -- Internet Options -- Content -- Certificates check the registered certificates.

Alt=Internet Explorer Internet options certificates

As an example, there is no certificate listed yet.

no certificate listed in Internet Explorer

To register a certificate, select the certificate and then click Register.

registering a certificate

A prompt should appear to tell you that the certificate has been registered.

certificate has been registered successfully

Go back to Internet Explorer -- Tools -- Internet Options -- Content -- Certificates; the registered certificate should now be displayed on the list.

registered certificate now displaying in Internet Explorer

To unregister a certificate, select a certificate and click Un-Register.

deregistering a UniMate certificate

After confirming, the certificate will be deregistered.

certificate deregistered successfully

Back in Internet Explorer -- Tools -- Internet Options -- Content -- Certificates, the registered certificate will have been removed.

no certificate displayed in Internet Explorer

View certificates

Select a certificate.

selecting a certificate to view

Click View to see the certificates details.

certificate viewer

Expiration reminder

You can set an expiration reminder time.

setting an expiration date reminder

Click Set.

expiration date reminder successfully set

When the expiration date is close to arriving, a balloon notification will appear to provide a warning that the certificate is close to expiring.

user's certificate will expire soon


Partition Tool (only for UniMate drive)

UniMate Drive Partition tool allows developer to set partitions, and to upload an ISO image to the Drives CD-ROM.

UniMate Drive partition tool

Click Get, and you will be provided with the total usable size of the UniMate Drive. You can set the partition as you wish, and then click Partition to perform the resize operation.

UniMate Drive partition tool, load ISO image

In the Load Image tab, you can load an ISO image to the Drives CD-ROM partition.


Write ISO Tool

UniMate Write ISO Tool is used for writing ISO images to UniKey dongles.

UniMate write ISO image to dongle tool


Change Language Mode Tool (For UniMate Flex)

UniMate Change Language Mode Tool is used with the UniMate Flex to change the display language.

UniMate change language mode


If you have any questions, please feel free to contact us at: http://www.esecutech.com/support or support@esecutech.com







About SecuTech

SecuTech Solution Inc. is a company specializing in data protection and strong authentication, providing total customer satisfaction in security systems & services for banks, financial institutions & other industries. Having extensive and in-depth experience within the information security market, SecuTech has drawn upon this experience to utilize today's cutting-edge technologies that are effective against increasingly sophisticated cyber attacks. Enabling enterprises, financial institutions, and government to safely adopt the economic benefits of mobile and cloud computing.

http://www.esecutech.com
SecuTech Solution Inc.

Contact Us:
North America China Asia-Pacific EMEA
Address 1250 Boulevard Ren-Lvesque Ouest, #2200, Montreal, QC, H3B 4W8, Canada Level 12, #67 Bei Si Huan Xi Lu, Beijing, China, 100080 Suite 5.14, 32 Delhi Rd, North Ryde, NSW, 2113, Australia 4 Cours Bayard 69002 Lyon, France
Phone +1 -888-259-5825 +8610-8288 8834 00612-9888 6185 +33-042-600-2810
Fax +1 -888-259-5825 ext.0 +8610-8288 8834 00612-9888 6185 +33-042-600-2810
Email info@esecutech.com cn@esecutech.com aus@esecutech.com europe@esecutech.com

Copyright 2012 SecuTech Solution Inc. All rights reserved. Reproduction in whole or in part without written permission from SecuTech is prohibited. SecuTech UniMate and the SecuTech logo are trademarks of SecuTech Inc. Windows and all other trademarks are properties of their respective owners. Features and specifications are subject to change without notice.



TOP

Retrieved from "https://esecutech.com/wiki/index.php?title=UniMate_USB_Utilities_Manual&oldid=2898"