UniOTP Management System: Difference between revisions
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
== Introduction == | == Introduction == | ||
<p>UniOTP Management System is a web-based management system | <p>The UniOTP Management System is a web-based management system. Administration and maintenance operations concerning dynamic password system configuration such as user information, token information, operator information, log information and so forth can be performed with this system.</p> | ||
<p>The system | <!--Check--> | ||
<p>The system employs different levels of privileges for compartmentalization of information and tasks.</p> | |||
== Operator | == Operator Login == | ||
<p>On the login page, in the OperatorID field enter the | <p>On the login page of the UniOTP Management System, input the Operator ID in the [OperatorID] field and enter the corresponding password in the [Password] field. Click [Submit] to log in.</p> | ||
<p>The default Operator ID for the Super Operator is "1000000001" with the corresponding default password "123456", both without quotation marks.</p> | |||
[[Image:uniotpmgs img01.jpg|370px]] | [[Image:uniotpmgs img01.jpg|370px]] | ||
<p>If | <p>If Operator login was successful, the administration interface will be accessible on the main page, otherwise an error message will appear if login credentials are incorrect.</p> | ||
<p> | <p>From the administration interface, actions to perform can be chosen from the menu on the left or from the shortcut icons in the main panel.</p> | ||
[[Image:uniotpmgs img02.jpg|370px]] | [[Image:uniotpmgs img02.jpg|370px]] | ||
== | == Logout == | ||
<p>To | |||
<p>To logout of the system, click [Exit System] located on the top-right of the window, as shown in the screenshot above. For security purposes, please always use this method to log out ofthe system.</p> | |||
[[Image:uniotpmgs img03.jpg|370px]] | [[Image:uniotpmgs img03.jpg|370px]] | ||
== Change Password == | == Change Password == | ||
<p> | <p>From the administration interface, click on [Change Password] from either under the [Operator Management] menu on the left or the [Change Password] shortcut on the main panel.</p> | ||
[[Image:uniotpmgs img04.jpg|370px]] | [[Image:uniotpmgs img04.jpg|370px]] | ||
<p>In the | <p>In the "Change Password" interface, input the current password in the [Old Password] field, and enter the new password in both the [New Password] and [Confirm] fields, enter the new password. Click [Submit] to apply changes.</p> | ||
[[Image:uniotpmgs img05.jpg|370px]] | [[Image:uniotpmgs img05.jpg|370px]] | ||
<p> | <p>A message will appear indicating if the password change was successful or unsuccessful.</p> | ||
<p> | == Search User == | ||
<!--J--> | |||
<p>From the administration interface, click on [User Search] from either under the [User Management] menu on the left or the [User Search] shortcut on the main panel.</p> | |||
[[Image:uniotpmgs img08.jpg|370px]] | [[Image:uniotpmgs img08.jpg|370px]] | ||
<p> | <p>Users can be found either directly by User ID or users with </p> | ||
[[Image:uniotpmgs img09.jpg|370px]] | [[Image:uniotpmgs img09.jpg|370px]] | ||
<p>For example, if you enter | <p>For example, if you enter [US20110127002] in the UserID field, you perform a search concerning information of the user having for ID US20110127002, modify or delete user or his information.</p> | ||
[[Image:uniotpmgs img10.jpg|370px]] | [[Image:uniotpmgs img10.jpg|370px]] | ||
<p>If you enter | <p>If you enter [t] in the Username field, you will see information about all users whose username contains a [t], you can choose the user you want to manage, modify or delete the user or his information.</p> | ||
[[Image:uniotpmgs img11.jpg|370px]] | [[Image:uniotpmgs img11.jpg|370px]] | ||
| Line 65: | Line 64: | ||
[[Image:uniotpmgs img14.jpg|370px]] | [[Image:uniotpmgs img14.jpg|370px]] | ||
<p>Fill in valid user information and click | <p>Fill in valid user information and click [Submit].</p> | ||
[[Image:uniotpmgs img15.jpg|370px]] | [[Image:uniotpmgs img15.jpg|370px]] | ||
| Line 147: | Line 146: | ||
[[Image:uniotpmgs img32.jpg|370px]] | [[Image:uniotpmgs img32.jpg|370px]] | ||
<p>For example, if you enter 1000000001 for the operatorID and click | <p>For example, if you enter 1000000001 for the operatorID and click [Submit], information about the operator having for ID [1000000001]( As 1000000001 stands for Super OperatorID, you need to be super operator to be able to see this information). You can use the icon in front of the operator ID to delete the operator, of course, if your privilege level is lower than the user you want to delete, the operation will not succeed.</p> | ||
[[Image:uniotpmgs img33.jpg|370px]] | [[Image:uniotpmgs img33.jpg|370px]] | ||
| Line 161: | Line 160: | ||
[[Image:uniotpmgs img35.jpg|370px]] | [[Image:uniotpmgs img35.jpg|370px]] | ||
<p>In order to import Token files, you need to provide decryption keys for those files, there is no decryption key function for user import. The extension for token files and user information files is | <p>In order to import Token files, you need to provide decryption keys for those files, there is no decryption key function for user import. The extension for token files and user information files is [.unif].</p> | ||
[[Image:uniotpmgs img36.jpg|370px]] | [[Image:uniotpmgs img36.jpg|370px]] | ||
| Line 188: | Line 187: | ||
[[Image:uniotpmgs img41.jpg|370px]] | [[Image:uniotpmgs img41.jpg|370px]] | ||
<p>In the log information interface, the | <p>In the log information interface, the [LogDomain] field is used to choose the type of logs, Syslos for everyday’s tasks logs, Commonlog for user authentication logs. In the QueryMode field you can choose logs for a specific operator, once you have specified an operator, the logs information displayed are only for the specified operator (If you specify username, the | ||
authentication logs information for this user only will be displayed.)</p> | authentication logs information for this user only will be displayed.)</p> | ||
<p>If you select the | <p>If you select the [Specific Operator] query mode, you have to fill in the [OperatorID] field, if you don’t, the operation will fail.</p> | ||
<p>In the two fields | <p>In the two fields [BeginData] and ]EndData] you can set the dates (from when to when) for the logs, click [submit] to search.</p> | ||
[[Image:uniotpmgs img42.jpg|370px]] | [[Image:uniotpmgs img42.jpg|370px]] | ||
| Line 233: | Line 232: | ||
[[Image:uniotpmgs img50.jpg|370px]] | [[Image:uniotpmgs img50.jpg|370px]] | ||
<p>In the | <p>In the [Backup Mode] choose the backup mode. You can choose to backup the whole database, including the tables structure and the data contained inside (You can specify which data you want to backup from the [Log Backup] field). You can also choose to backup only the table structure. In this case, the data contained inside the database will not be backed up.</p> | ||
[[Image:uniotpmgs img51.jpg|370px]] | [[Image:uniotpmgs img51.jpg|370px]] | ||
| Line 243: | Line 242: | ||
[[Image:uniotpmgs img52.jpg|370px]] | [[Image:uniotpmgs img52.jpg|370px]] | ||
<p>Once you entered the statistics page, In the | <p>Once you entered the statistics page, In the [Load Analysis] part, you can perform load statistics. | ||
In Operation statistics, you can perform operation statistics. You can choose a scale for these two parts (Year or month). In | In Operation statistics, you can perform operation statistics. You can choose a scale for these two parts (Year or month). In [Display Mode] field, you can choose the display method, there are three kinds: histograms, line charts, pie charts.</p> | ||
[[Image:uniotpmgs img53.jpg|370px]] | [[Image:uniotpmgs img53.jpg|370px]] | ||
| Line 260: | Line 259: | ||
== System configuration == | == System configuration == | ||
<p>Using the system configuration page you can change system settings. Click | <p>Using the system configuration page you can change system settings. Click [Config Database] to configure the database.</p> | ||
[[Image:uniotpmgs img56.jpg|370px]] | [[Image:uniotpmgs img56.jpg|370px]] | ||
Revision as of 13:42, 1 June 2012
Introduction
The UniOTP Management System is a web-based management system. Administration and maintenance operations concerning dynamic password system configuration such as user information, token information, operator information, log information and so forth can be performed with this system.
The system employs different levels of privileges for compartmentalization of information and tasks.
Operator Login
On the login page of the UniOTP Management System, input the Operator ID in the [OperatorID] field and enter the corresponding password in the [Password] field. Click [Submit] to log in.
The default Operator ID for the Super Operator is "1000000001" with the corresponding default password "123456", both without quotation marks.
If Operator login was successful, the administration interface will be accessible on the main page, otherwise an error message will appear if login credentials are incorrect.
From the administration interface, actions to perform can be chosen from the menu on the left or from the shortcut icons in the main panel.
Logout
To logout of the system, click [Exit System] located on the top-right of the window, as shown in the screenshot above. For security purposes, please always use this method to log out ofthe system.
Change Password
From the administration interface, click on [Change Password] from either under the [Operator Management] menu on the left or the [Change Password] shortcut on the main panel.
In the "Change Password" interface, input the current password in the [Old Password] field, and enter the new password in both the [New Password] and [Confirm] fields, enter the new password. Click [Submit] to apply changes.
A message will appear indicating if the password change was successful or unsuccessful.
Search User
From the administration interface, click on [User Search] from either under the [User Management] menu on the left or the [User Search] shortcut on the main panel.
Users can be found either directly by User ID or users with
For example, if you enter [US20110127002] in the UserID field, you perform a search concerning information of the user having for ID US20110127002, modify or delete user or his information.
If you enter [t] in the Username field, you will see information about all users whose username contains a [t], you can choose the user you want to manage, modify or delete the user or his information.
Add a User
Refer to the icon on the picture to perform user related information.
In order to add a user, you need to provide a unique username, a unique User ID, phone number, the token serial number that you want to allocate to this user, user mail address, user static PIN, authentication method (We recommend to user the more secure OTP+PIN authentication method), Username and system UserID can be used together to perform binding, the token serial number has to be a valid serial number.
If you enter an invalid token serial number, you will get the error message below.
Fill in valid user information and click [Submit].
User added successfully
User Status change
You can perform settings about user status using this section, report a token a lost, cancel the lost report, or permanently remove the token and related operations.
The picture below shows the user status change page (only supports user ID to perform operations on user status)
Repair a token
For certain reasons, the token can get disabled. In this case, you can try to perform token reparation operation in order to re-enable the token. Refer to the picture below to enter the token reparation interface.
You need to provide two consecutive dynamic passwords in order to synchronize the token.
Token reparation successful
If the two dynamic passwords are not consecutive, or if it exceeds a certain range, the reparation will fail.
Add an operator
This interface is used to add new operators in the system, the user added should not be higher than the operator privilege level, and otherwise the operation will fail.
The picture below shows the add operator page, you need to provide operator first and last name,password, operator privilege level.
If the operation succeeds, the following message will be returned, displaying the OperatorID that you need to use for login, This ID is used by the operator to log in the system.
If privilege is not sufficient, you will get the following error message.
Delete an operator
This interface is used to delete an operator from the database, but your privilege level needs to be higher than the operator you are deleting. Refer to the picture below enter this interface.
Like shown in the picture, you can delete an operator using his operator ID. You can also delete a range of operators from a specific ID to a specific ID.
If you don’t have sufficient privilege to delete the operator, you will get the following error message.
If the operation succeeds, the following message will be displayed.
Operator information search
With Operator information search interface, you can perform search concerning operators, access this page from the left menu or using the shortcut icon in the main panel.
You can indicate the operator ID to search for information concerning this operator, or you can also indicate a specific range of operators to search for all operators that have privilege level inferior to the current operator.
For example, if you enter 1000000001 for the operatorID and click [Submit], information about the operator having for ID [1000000001]( As 1000000001 stands for Super OperatorID, you need to be super operator to be able to see this information). You can use the icon in front of the operator ID to delete the operator, of course, if your privilege level is lower than the user you want to delete, the operation will not succeed.
Search for operator ID in a specific range:
Token/User batch import
Token/User batch import interface allows the service provider to import many tokens information at once inside the database, it also can import many users bound to a token at once inside the database. Refer to the picture below to enter the corresponding interface.
In order to import Token files, you need to provide decryption keys for those files, there is no decryption key function for user import. The extension for token files and user information files is [.unif].
If there is an error with the secret key error or if the file is corrupted, the following message will be displayed.
the token file part will successfully prompt an error information for the error token , there is no line in front of the failure of the token serial number corresponding to the record, you can export the information to the service provider to determine the cause of the error (duplicate import should be excluded due to errors)
If token import succeeds, a message will be displayed specifying the number of token imported
In the case user import has failed, the following error message, containing the details about the concerned users, will be displayed.
Log information search
Log information search feature provides a log search, which includes everyday’s operations logs and users’ authentication logs. Refer to the icon pointed in the picture below to enter the log information search interface.
In the log information interface, the [LogDomain] field is used to choose the type of logs, Syslos for everyday’s tasks logs, Commonlog for user authentication logs. In the QueryMode field you can choose logs for a specific operator, once you have specified an operator, the logs information displayed are only for the specified operator (If you specify username, the authentication logs information for this user only will be displayed.)
If you select the [Specific Operator] query mode, you have to fill in the [OperatorID] field, if you don’t, the operation will fail.
In the two fields [BeginData] and ]EndData] you can set the dates (from when to when) for the logs, click [submit] to search.
The logs from a certain period will look like below:
If no corresponding result has been found:
Logs export
Export logs information to a file.
Set the dates in the two fields BeginDate and EndDate, in the LogDomain field, choose the logs type. In the compress field, choose the type of compression you want to use. Click Submit to backup the selected logs.
Clear logs
Before clearing all logs, we recommend to make a logs backup.
When clearing logs succeeds, the following message will be displayed.
Database backup
The database backup feature is used to restore all the needed information.
In the [Backup Mode] choose the backup mode. You can choose to backup the whole database, including the tables structure and the data contained inside (You can specify which data you want to backup from the [Log Backup] field). You can also choose to backup only the table structure. In this case, the data contained inside the database will not be backed up.
Statistics
You can see temporal and spatial repartition, make statistics, analyze about authentication strength repartition and operation repartition.
Once you entered the statistics page, In the [Load Analysis] part, you can perform load statistics. In Operation statistics, you can perform operation statistics. You can choose a scale for these two parts (Year or month). In [Display Mode] field, you can choose the display method, there are three kinds: histograms, line charts, pie charts.
The picture below shows the histogram of operation type analyze.
System information
Click the home icon in the left menu to show system information and system configuration page this page displays system information and the current settings list.
System configuration
Using the system configuration page you can change system settings. Click [Config Database] to configure the database.
Once you’ve entered the database settings page, you can change database settings such as database host, database name, port, login username, login password. You can also test the connection to the database, after you submitted it, a new configuration file will be created.
