UniKey Drive Virtual CD-ROM Solution - Revision history

Bao: Minor update, alt tags

2016-08-08T23:50:08Z

Minor update, alt tags

← Older revision		Revision as of 10:50, 9 August 2016
Line 4:		Line 4:
	== Virtual CD-ROM Partition ==		== Virtual CD-ROM Partition ==

	The UniKey Drive Virtual CD-ROM allows users to store files and folders within the UniKey device's read-only partition, and functions the same way as ~~stored on~~ the normal partition with the exception that all files are read-only, ~~and~~ cannot be modified or deleted. From the perspective of the operating system, the partition appears as a CD-ROM ("Compact Disc Read-~~only memory"~~).		The UniKey Drive Virtual CD-ROM allows users to store files and folders within the UniKey device's read-only partition, and it functions the same way as the normal partition with the exception that all files are read-only, thus cannot be modified or deleted. From the perspective of the operating system, the partition appears as a CD-ROM (Compact Disc Read-Only Memory).

	Below is the process on setting the contents of the UniKey Virtual CD-ROM partition.		Below is the process of setting the contents on the UniKey Virtual CD-ROM partition.

	=== Generate ISO Image ===		=== Generate ISO Image ===

	All files and folders to be the contents of the Virtual CD-ROM drive must be archived into an .iso file. ISO images are used to specify the contents of an optical disc, and may be configured to autorun (automatically run) an executable when inserted into the machine.		All files and folders that will be part of the contents of the Virtual CD-ROM drive must be archived into an .iso file. ISO images are used to specify the contents of an optical disc, and may be configured to 'autorun' (automatically run) an executable when inserted into the machine. An .iso image can be produced using image creation software. One recommendation is [http://imgburn.com ImgBurn].

	~~The~~ .iso image can be produced using image creation software. One recommendation is [http://imgburn.com ImgBurn].

	=== Load with UniKey Init Tool ===		=== Load with UniKey Init Tool ===

	Once an .iso image has been produced from the desired files and folders, the ~~.iso~~ image can be loaded onto the UniKey device with the UniKey Init tool. Notably, while configuring settings within the Init tool, the ~~.iso image~~ to load onto the UniKey Drive can be selected from [Virtual CD (ISO File)] in the "Settings" tab.		Once an .iso image has been produced from the desired files and folders, the image can then be loaded onto the UniKey device with the UniKey Init tool. Notably, while configuring settings within the Init tool, the ISO to load onto the UniKey Drive can be selected from Virtual CD (ISO File) in the Settings tab.

	[[Image:UniKey_Drive_VirtualCD-ROM_Pic02.jpg\|370px]]		[[Image:UniKey_Drive_VirtualCD-ROM_Pic02.jpg\|370px\|alt=UniKey Drive Init Tool Virtual CD (ISO File)]]

	Please see [[UniKey Init Tool\|UniKey Init ~~tool~~]] for more information on ~~usage of~~ the UniKey Drive Init Tool.		Please see [[UniKey Init Tool\|UniKey Init Tool]] for more information on how to use the UniKey Drive Init Tool.

Joseph: moved UniKey Drive VirtualCD-ROM Solution to UniKey Drive Virtual CD-ROM Solution

2012-10-09T00:14:57Z

moved UniKey Drive VirtualCD-ROM Solution to UniKey Drive Virtual CD-ROM Solution

← Older revision	Revision as of 11:14, 9 October 2012
(No difference)

Joseph at 06:38, 28 September 2012

2012-09-28T06:38:02Z

@@ Line 1: / Line 1: @@
 [[category:UniKey Application Solutions]]
-= Introduction<br> =
+== Virtual CD-ROM Partition ==
-UniKey Drive Virtual CD-ROM could allow the users to store files and the files stored inside of the Virtual CD-ROM will work with the same function as a real CD-ROM.
+=== Generate ISO Image ===
-<br>This article will guide you on how to put files inside of UniKey Virtual CD-ROM.
+All files and folders to be the contents of the Virtual CD-ROM drive must be archived into an .iso file. ISO images are used to specify the contents of an optical disc, and may be configured to autorun (automatically run) an executable when inserted into the machine.
-= Chart =
+Once an .iso image has been produced from the desired files and folders, the .iso image can be loaded onto the UniKey device with the UniKey Init tool. Notably, while configuring settings within the Init tool, the .iso image to load onto the UniKey Drive can be selected from [Virtual CD (ISO File)] in the "Settings" tab.
+Please see [[UniKey Init Tool|UniKey Init tool]] for more information on usage of the UniKey Drive Init Tool.

Joseph: Reverted edits by Joseph (talk) to last revision by Cloud

2012-09-28T05:34:00Z

Reverted edits by Joseph (talk) to last revision by Cloud

← Older revision		Revision as of 16:34, 28 September 2012
Line 1:		Line 1:
	[[category:~~UniKey_Tools~~]]		[[category:UniKey Drive VirtualCD-ROM Solution]]
	~~:''Note~~: UniKey ~~Drive only.''~~		[[category:UniKey Application Solutions]]

	=~~= UniKey Drive Init Tool =~~=		= Introduction<br> =

	The UniKey Drive Initialization tool is used to set the parameters of and initialise a UniKey Drive device. With the Init tool, settings which can be configured include the size of the general (normal) partition, the size of the password-protected partition, the size and password of the hidden partition and the contents of the read-only partition. These settings can be initialized to one or multiple UniKey Drive devices.

	~~=== Settings ===~~

	~~In the "Settings" tab, the user can set the partition sizes within~~ UniKey Drive~~, contents of VCD partition~~ and the ~~password~~ of the ~~password-protected partition.~~		UniKey Drive Virtual CD-ROM could allow the users to store files and the files stored inside of the Virtual CD-ROM will work with the same function as a real CD-ROM.
	<!--~~Note that sizes of the partitions affected by size of~~ .~~iso file-->~~

	* To set the contents of the Virtual CD-ROM drive, select the desired .iso to be loaded onto the read-only partition in the [Virtual CD (ISO File)] option. A default .iso image is provided within the same folder at the Init tool in the SDK, containing the UniKey Drive Entry tool "Entry.exe", used for gaining access to the password-protected partition.<br>~~Please note that an .iso image must be provided~~ to ~~initialise the UniKey Drive device.~~		<br>This article will guide you on how to put files inside of UniKey Virtual CD-ROM.
	* The size of the Hidden Drive has can be specified under the [Hidden Drive] option, a value between 1 to 1023 in megabytes. This partition is not accessible by any means other than pre-programmed commands using the UniKey ~~Drive API.~~
	* The General/Protected Drive Physical Capacity slider provides selection over the amount of space allocated to either partition. The normal parition (general drive) is openly accessible, whereas the password-~~protected partition (protected drive) requires the correct password entered into the Entry tool to access it.~~
	* Setting the password of the password-protected partition can be done in the [Secure Password] fields.

	~~[[Image:UniKey_Init_Tool_Pic01.jpg]]~~

	~~To clear all settings back to the default, click on [Reset]. Current settings can be saved to a .ini file by clicking [Save], and can be later loaded through [Load].~~

	All fields must be specified and valid, and a valid .iso image must be given in the Virtual CD-ROM option for initialization to be successful. A error message will appear if settings have not been configured correctly.		= Chart =

	~~=== Initing ===~~

	~~After settings have been configured in the "Settings" tab, configured settings can be initialized onto the UniKey Drive from the "Initing" tab.~~

	[[Image:~~UniKey_Init_Tool_Pic02~~.jpg]]		[[Image:UniKey_Drive_VirtualCD-ROM_Pic01.jpg]]

	~~To initialise multiple UniKey Drive devices with the same settings, tick the [In batch] box, otherwise leave the option unchecked to only initialize one device.~~

	~~After a UniKey Drive device is plugged in, clicking the [Init] button will begin the initialization process and will format the UniKey Drive to preconfigured settings.~~

	~~Warning: All data on the device is deleted during initialization.~~		= Source Files =

	~~:'''Important''': Do not remove the UniKey device until initialization has completed! Failure to do so may render the device inoperable.~~

	~~Once the Progress window outputs "Initialized successfully", the UniKey Drive device can be safely removed.~~

	~~If the [In batch] option is ticked, the following popup will appear~~.		The source files for burning into UniKey Drive CD-ROM can be any types as you want.

	~~[[Image:UniKey_Init_Tool_Pic03~~.~~jpg]]~~		<br>The best solution is to use the protected application as the source files, and then you only need to send the UniKey Drive dongles stored with your protected software to your end users.

	~~Remove and insert the next UniKey Drive as needed, clicking [Cancel] when finished.~~

	~~=== Record ===~~

	In the ~~"Record tab"~~, ~~initialization logs are chronologically listed~~ and ~~can be printed with~~ [~~Print~~].		= Free ISO Tool<br> =



			In order to create .ISO file, we can use some free ISO create Tool, such as Free ISO Creator. These tools will allow us to create .ISO file and inside of this .ISO file we could store the files we want.





			= UniKey Init Tool =



			UniKey Init Tool is inside of the UniKey Drive SDK, under the directory of /Utilities/

			<br>Inside of Settings Page, we could add the .ISO file to the Virtual CD-ROM and this tool will automatically burn the .ISO to the UniKey Drive Virtual CD-ROM.<br>(For more information on UniKey Drive Init Tool, please refer the UniKey Drive Init Tool article)



			[[Image:UniKey_Drive_VirtualCD-ROM_Pic02.jpg]]

			<br>

Joseph at 05:32, 28 September 2012

2012-09-28T05:32:28Z

← Older revision		Revision as of 16:32, 28 September 2012
Line 1:		Line 1:
	[[category:~~UniKey Drive VirtualCD-ROM Solution~~]]		[[category:UniKey_Tools]]
	~~[[category~~:UniKey ~~Application Solutions]]~~		:''Note: UniKey Drive only.''

	= ~~Introduction<br>~~ =		== UniKey Drive Init Tool ==

			The UniKey Drive Initialization tool is used to set the parameters of and initialise a UniKey Drive device. With the Init tool, settings which can be configured include the size of the general (normal) partition, the size of the password-protected partition, the size and password of the hidden partition and the contents of the read-only partition. These settings can be initialized to one or multiple UniKey Drive devices.

			=== Settings ===

	UniKey Drive ~~Virtual CD-ROM could allow the users to store files~~ and the ~~files stored inside~~ of the ~~Virtual CD~~-~~ROM will work with~~ the ~~same function as a real CD~~-~~ROM.~~		In the "Settings" tab, the user can set the partition sizes within UniKey Drive, contents of VCD partition and the password of the password-protected partition.
			<!--Note that sizes of the partitions affected by size of .iso file-->

	<br>This ~~article will guide you on how~~ to ~~put files inside~~ of ~~UniKey Virtual CD~~-~~ROM~~.		* To set the contents of the Virtual CD-ROM drive, select the desired .iso to be loaded onto the read-only partition in the [Virtual CD (ISO File)] option. A default .iso image is provided within the same folder at the Init tool in the SDK, containing the UniKey Drive Entry tool "Entry.exe", used for gaining access to the password-protected partition.<br>Please note that an .iso image must be provided to initialise the UniKey Drive device.
			* The size of the Hidden Drive has can be specified under the [Hidden Drive] option, a value between 1 to 1023 in megabytes. This partition is not accessible by any means other than pre-programmed commands using the UniKey Drive API.
			* The General/Protected Drive Physical Capacity slider provides selection over the amount of space allocated to either partition. The normal parition (general drive) is openly accessible, whereas the password-protected partition (protected drive) requires the correct password entered into the Entry tool to access it.
			* Setting the password of the password-protected partition can be done in the [Secure Password] fields.

			[[Image:UniKey_Init_Tool_Pic01.jpg]]

			To clear all settings back to the default, click on [Reset]. Current settings can be saved to a .ini file by clicking [Save], and can be later loaded through [Load].

	~~= Chart =~~		All fields must be specified and valid, and a valid .iso image must be given in the Virtual CD-ROM option for initialization to be successful. A error message will appear if settings have not been configured correctly.

			=== Initing ===

			After settings have been configured in the "Settings" tab, configured settings can be initialized onto the UniKey Drive from the "Initing" tab.

	[[Image:~~UniKey_Drive_VirtualCD-ROM_Pic01~~.jpg]]		[[Image:UniKey_Init_Tool_Pic02.jpg]]

			To initialise multiple UniKey Drive devices with the same settings, tick the [In batch] box, otherwise leave the option unchecked to only initialize one device.

			After a UniKey Drive device is plugged in, clicking the [Init] button will begin the initialization process and will format the UniKey Drive to preconfigured settings.

	~~= Source Files =~~		Warning: All data on the device is deleted during initialization.

			:'''Important''': Do not remove the UniKey device until initialization has completed! Failure to do so may render the device inoperable.

			Once the Progress window outputs "Initialized successfully", the UniKey Drive device can be safely removed.

	~~The source files for burning into UniKey Drive CD-ROM can be any types as you want~~.		If the [In batch] option is ticked, the following popup will appear.

	~~<br>The best solution is to use the protected application as the source files, and then you only need to send the UniKey Drive dongles stored with your protected software to your end users~~.		[[Image:UniKey_Init_Tool_Pic03.jpg]]

			Remove and insert the next UniKey Drive as needed, clicking [Cancel] when finished.

			=== Record ===

	~~= Free ISO Tool<br> =~~		In the "Record tab", initialization logs are chronologically listed and can be printed with [Print].



	In ~~order to create .ISO file, we can use some free ISO create Tool, such as Free ISO Creator. These tools will allow us to create .ISO file and inside of this .ISO file we could store the files we want.~~





	~~= UniKey Init Tool =~~



	~~UniKey Init Tool is inside of the UniKey Drive SDK, under~~ the ~~directory of /Utilities/~~

	~~<br>Inside of Settings Page~~, ~~we could add the .ISO file to the Virtual CD-ROM~~ and ~~this tool will automatically burn the .ISO to the UniKey Drive Virtual CD-ROM.<br>(For more information on UniKey Drive Init Tool, please refer the UniKey Drive Init Tool article)~~



	[~~[Image:UniKey_Drive_VirtualCD-ROM_Pic02~~.~~jpg]]~~

	~~<br>~~

Cloud at 06:16, 2 May 2012

2012-05-02T06:16:40Z

← Older revision		Revision as of 17:16, 2 May 2012
Line 1:		Line 1:
	[[category:UniKey Drive VirtualCD-ROM Solution]]		[[category:UniKey Drive VirtualCD-ROM Solution]]
			[[category:UniKey Application Solutions]]

	= Introduction<br> =		= Introduction<br> =

Cloud at 08:16, 18 April 2012

2012-04-18T08:16:23Z

← Older revision		Revision as of 19:16, 18 April 2012
Line 15:		Line 15:


	~~PIC01~~		[[Image:UniKey_Drive_VirtualCD-ROM_Pic01.jpg]]


Line 49:		Line 49:


	~~PIC02~~<br>		[[Image:UniKey_Drive_VirtualCD-ROM_Pic02.jpg]]

			<br>

Cloud: Created page with "category:UniKey Drive VirtualCD-ROM Solution = Introduction
= UniKey Drive Virtual CD-ROM could allow the users to store files and the files stored inside of the V..."

2012-04-18T08:15:04Z

Created page with "category:UniKey Drive VirtualCD-ROM Solution = Introduction = UniKey Drive Virtual CD-ROM could allow the users to store files and the files stored inside of the V..."

New page

[[category:UniKey Drive VirtualCD-ROM Solution]]

= Introduction =

UniKey Drive Virtual CD-ROM could allow the users to store files and the files stored inside of the Virtual CD-ROM will work with the same function as a real CD-ROM.

 This article will guide you on how to put files inside of UniKey Virtual CD-ROM.

= Chart =

PIC01

= Source Files =

The source files for burning into UniKey Drive CD-ROM can be any types as you want.

 The best solution is to use the protected application as the source files, and then you only need to send the UniKey Drive dongles stored with your protected software to your end users.

= Free ISO Tool =

In order to create .ISO file, we can use some free ISO create Tool, such as Free ISO Creator. These tools will allow us to create .ISO file and inside of this .ISO file we could store the files we want.

= UniKey Init Tool =

UniKey Init Tool is inside of the UniKey Drive SDK, under the directory of /Utilities/

 Inside of Settings Page, we could add the .ISO file to the Virtual CD-ROM and this tool will automatically burn the .ISO to the UniKey Drive Virtual CD-ROM. (For more information on UniKey Drive Init Tool, please refer the UniKey Drive Init Tool article)

PIC02